espio-senor  APSP ASTM FCC NSF Safe Kids IPSSA NDPA UL
• Main working principle -- • Streaming Video -- • configuration

Main working principle

esio-senorAquasensor smart technology quickly senses pool fall by people that are 18 pounds or heavier to meet ASTM F2208-02. A powerful poolside alarm (100 db) and wireless remote alarm (85db) are both activated within seconds when fall is detected. Sensor Espio™ is effective in pools as large as 20' x 50'.

While Sensor Espio™ dependably senses fall, it is not falsely triggered by other routine water disturbances. Exclusive detection technology knows the difference between body fall and wind, rain, and water disturbances created by pool equipment. The result is a minimum of false alarms.

Streaming video

How does it work?


The fall detector, when activated, monitors the pool activity permanently. When a body falls in the pool, Sensor Espio™ analyses the generated underwater wave and triggers its powerful sirens to warn of the danger and therefore optimizes adult's reaction.
When you want to swim, you inform Sensor Espio™ using the provided remote control and Sensor Espio™ will therefore suspend its monitoring while you are swimming. After swimming, once you have left the pool and the pool water has become still again, Sensor Espio™ will automatically restart its monitoring and inform you.
During the time between the end of swimming and the automatic rearming of Sensor Espio™, it is compulsory to remain vigilant

Configuration

• Choice of location -- • Pool under construction: final attachment -- • Existing pool: final attachment

Choice of location

espio-senor-placementDo not install your device on the pool edge before having determined the location that will ensure optimal monitoring of your swimming pool. After having determined the appropriate location, you must ensure that the siren can be heard from your home. Sensor Espio™ must be positioned in the center of the long side (position recommended for rectangular swimming pools) and against a flat wall in your pool. If your pool does not correspond to the configurations shown below, ask your retailer for advice. Check that there is easy and practical access to the activation zone (where you place the magnet).

warningEnsure that the central unit is more than 3 feet away from the filtration system (return fittings, waste plug, skimmer, vacuum fittings, etc.) or waterfall or any other device that may disturb the pool at this place. Your fall detector can be used on pools with maximum dimensions of 20 x 50 feet, and must not be more than 33 feet away from all possible fall locations. In the case of a larger swimming pool, or one that is of a particular shape, ask your retailer for advice.

Pool under construction: final attachment

espio-sensor-placementFasten the attachment support as your pool is being built, and imperatively before the coping is laid. Sensor Espio™ must imperatively be flat against the wall of the pool. To make sure this is the case, you might have to put the attachment support slightly out of shape.

Download Notice Sensor Espio "Pool under construction" (pdf)

espio-senor-placement

Existing pool: final attachment

espio-sensor-placementSensor Espio™ must imperatively be flat against the wall of the pool. To make sure this is the case, you might have to put the attachment support slightly out of shape so that it fits snugly against the coping. Put Sensor Espio™ in “total shut-off” mode so that it can be handled freely during its final installation.

Download Notice Sensor Espio "Existing pool" (pdf)

espio-senor-placement